EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Charge Controller is often a remarkably effective photo voltaic controller designed for off-grid solar devices. Dependant on multiphase synchronous rectification technologies, it assures optimized Electricity conversion and method balance for an array of photovoltaic (PV) purposes.
Key Attributes in the EPEVER Tracer AN Collection Controller
The Tracer AN series makes use of EPEVER Solar Charge Controller know-how for excellent photo voltaic Electrical power harvesting. Essential capabilities contain:
Multiphase Synchronous Rectification (MSR) for enhanced energy conversion.
Advanced MPPT Algorithm with >ninety nine% performance.
Dual-Stage Charging for enhanced battery daily life.
Liquid crystal display Display with real-time knowledge monitoring.
Several Load Handle Modes which include handbook and timer.
Comprehensive Electronic Protections from overcharging, over-discharging, small circuits, and reverse polarity.
Phase-by-Phase Guide to Creating the EPEVER Tracer AN Series Controller
1. Unboxing and Getting ready the Controller
Guarantee all parts are integrated: Tracer AN unit, temperature sensor, communication cables, and consumer guide.
Validate the model variety and voltage scores match your photo voltaic panel and battery technical specs.
2. Mounting the Demand Controller
Pick out a well-ventilated, dry area close to the battery financial institution.
Safe the Tracer AN controller utilizing the supplied mounting brackets.
Maintain suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Charge Controller
Caution: Often follow proper basic safety protocols and make sure the system is driven off ahead of connecting factors.
Phase one: Link the battery terminals towards the demand controller (good to beneficial, adverse to detrimental).
Stage 2: Link the photo voltaic panel array towards the PV enter terminals.
Stage three: Connect the load terminals if employing a immediate load relationship.
Stage four: Double-check all connections Read more for polarity and tightness.
4. Configuring the Controller Configurations
Electric power on the controller by connecting the battery first.
Make use of the LCD display to navigate the settings menu.
Configure:
Battery Form: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Regulate Modes: Guide, timer, light Regulate.
5. Checking and Info Logging
The Tracer AN Series supports real-time checking using the MT50 remote meter.
Facts might be logged by using the RS485 communication port employing application like Solar Station Computer.
Distant monitoring is feasible Along with the EPEVER WiFi module.
6. Troubleshooting Typical Problems
Issue 1: No Electric power Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Issue 2: About-Voltage Protection
Confirm the solar array’s voltage rating.
Adjust method parameters if vital.
Difficulty three: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT configurations inside the menu.
Great things about the Tracer AN Sequence with MSR Technological innovation
The multiphase synchronous rectification engineering makes sure:
Larger Performance: Decreased Electricity losses through conversion.
Enhanced Dependability: Secure functionality under variable masses.
For a longer time Battery Lifestyle: Regular and accurate charging profiles.
Conclusion
The EPEVER Photo voltaic Charge Controller with multiphase synchronous rectification technological innovation is definitely an Extraordinary option for optimizing solar energy era and lengthening battery lifestyle. By next the above mentioned set up manual, end users can make sure utmost efficiency and program longevity.